IHC/IHC Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ihc] 80 Scout, Koenig PTO Winch Question



John-

IIRC, the 5 speed transmissions have the 10 bolt PTO output. The 4 speed in
a scout came with a 6 bolt PTO.

I don't recall which PTO is used on the NP205 transfer case, but the
pre-1970 NP202 uses the same PTO as the 5 speed transmissions. You didn't
mention which  year travelall you had or whether it was 2wd or 4x4, but the
transmission PTOs are not the same.


----- Original Message ----- 
From: "John M. Adams" <jma@domain.elided>
To: <ihc@domain.elided>
Sent: Sunday, November 02, 2003 7:43 PM
Subject: [ihc] 80 Scout, Koenig PTO Winch Question


> Can someone tell me please what the stock manual transmissions were on the
> 1980 Scout II? I am considering the purchase of an 8000 lb Koenig L621 PTO
> winch setup that is currently on such a Scout. The seller can't tell me
what
> tranny it's mounted on, just that it's a 1980 Scout II. I need to research
> whether this PTO will fit on my rig, a 1/2 ton T-All which has the T34 5
> speed. Thanks in advance... -John
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.528 / Virus Database: 324 - Release Date: 10/16/03


Home | Archive | Main Index | Thread Index