Allan on 392s

["Joel M Brodsky" <jmbrodsky@xxxxxxxxxxxx>]

Allan, et al,
      Don't forget that some 392s (maybe 345s too) have different mounting
bosses on the outside that may not allow it to be mounted in a Scout II,
Travelall, or Pickup.  I had a 392 core that I got from Joel Furtek for my
Yellow Travelall, but the mounting bosses on the side were not drilled for
the 74/75 PU/TA and Scout type motor mounts.  Comer was kind enough to swap
me blocks for one that he had that he didn't need the drilled bosses.  Make
sure you don't get a block cleaned and bored before realizing this.  The
mounts that bolt to the side of the engine may or may not be pre-drilled in
your block.

fyi,

JoelB