re: How to R&R driveshaft bushing?

[Dana Loomis <dloomis@domain.elided>]

Relaying for Jim Steck, who has trouble posting to the Digest:

>The suggestions I saw appeared to be for the removal of the center support 
>bearing, not the bushing that aligns the guibo. For that, I weld a 5/8-18 nut 
>to the front of the bushing and use my slide hammer to remove it. The 
>combination of heat from welding and the small amount of shrinkage you get
when 
>the weld cools, makes the bushing fairly easy to remove.
>The bushing is very hard, so drilling is not an option.
>Regards, 
>Jim Steck
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided