IHC/IHC Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ihc] Coil Voltage?



on 3/21/04 2:49 PM, George B Humphrey at xgbhx@domain.elided wrote:

> So, it sounds like I have the wire coming from the Delco solenoid to the
> coil on the wrong terminal. Let me see if I have this right. The Delco
> solenoid has technically four terminals. The B is the big one closest to
> the tire. The S is on top. The R is on the bottom and the fourth is
> connected to the starter. I have B and S spliced together and the wire to
> the coil coming off of the R term. like so;
> 
> Battery-------------Ford solenoid --------------To B term. on delco
> S Term.----- To Ignition

Aha, George, I didn't realize that you have the major Ford solenoid
conversion, which I haven't done, but I understand.

Go to the Binder Bulletin FAQ where there is a great circuit diagram of what
yours should look like.

One picture is worth a thousand words.

John

John Hofstetter
www.goldrush.com/~hofs


Home | Archive | Main Index | Thread Index