Re: [ihc] Coil Voltage?

[George B Humphrey <xgbhx@xxxxxxxx>]

Dan,
	If I put a wire from the remote solenoid where the other wires are
connected directly to the coil and the trigger to the relay connected to
the coil, wouldn't I have a continuously charged relay, even when the
ignition was off?

	No aftermarket ignition.

George H.
72 Scout II
345 V8


On Sat, 20 Mar 2004 23:19:18 -0500 (Eastern Standard Time) "Dan Nees"
<cookiedan@domain.elided> writes:
> George, >    Try running a wire direct to the coil from the battery and
see if 
> that
> works. That would give you 12 volts direct. If that works, then 
> switch the
> wire on the starter to the remote solenoid where you have the other 
> wires
> attached.  >    You don't have an aftermarket ignition do you? If not
then just 
> leave the
> 12 volts feed, the reason it drops to 5+ is to save the points from
> excessive wear. >  


________________________________________________________________
The best thing to hit the Internet in years - Juno SpeedBand!
Surf the Web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!