IHC/IHC Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [ihc] 13" clutches ...I think it is possible
I agree with Dan. I have the 12", 12 spring in my T'All, and one time
after a backpacking injury to my knee, a slight strain - nothing very
serious, I couldn't drive my truck for a week... Another consideration:
When it's very cold, I have to sit there with the clutch depressed
during engine warm-up for a couple of minutes. If I let it out too soon,
it will kill the engine. I always figured that was due to the size
and weight of the assembly (but could be wrong - do you all have this
problem?). On another side note: after I get the engine and the clutch
going OK, I then warm up the tranny with the t-case in neutral. It can
take me 30 minutes to warm up my truck in the winter!
-John
-----Original Message-----
From: owner-ihc@domain.elided [mailto:owner-ihc@domain.elided]On Behalf Of
Daniel Nees
Sent: Saturday, November 08, 2003 10:04 AM
To: Rocky Lear
Cc: ihc-digest@domain.elided
Subject: Re: [ihc] 13" clutches ...I think it is possible
Rocky,
You sure can fit the 13" clutch in there, but; it sure is a bear to
push the pedal in with it! The 12" is pretty tight as it is, the 13's,
especially when new, are really stiff.
Dan Nees
danees@domain.elided
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.536 / Virus Database: 331 - Release Date: 11/3/03
Home |
Archive |
Main Index |
Thread Index