Re: scout II spindle nut sockets.

["Marcus Bechtel" <SHODUDE@xxxxxxxxxxxxx>]

That is definitely the correct size socket. It can be had at Harbor Freight
for about the same cost.

A 2 1/4 or 2 1/8" might work, but the OD of the socket is generally the
limiting factor.

Marcus


>>>>>I just bought a spindle nut socket, nuts and washers at the local j**p
<<<<<joint. The socket is 2 1/16 and is a thin stamp type affair. It was
only
>>>>>$12. A regular socket may be too thick.