RE: Rear wheel bearings

To: "IH Digest" <ihc-digest@domain.elided>
Subject: RE: Rear wheel bearings
From: "Kurt Musgrave" <rvar@domain.elided>
Date: Wed, 7 Apr 1999 22:35:54 -0600
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;charset="iso-8859-1"
Importance: Normal
In-Reply-To: <v01510106b331c059f7bb@[204.132.128.1]>
Reply-To: "Kurt Musgrave" <rvar@domain.elided>
Sender: owner-ihc@domain.elided

The Dana 60 in my 68 Travelall is made just as you describe.  Has the spacer
between the axles and the adjuster on the right side.  It even has zerks at
the outer ends of the axle tube to grease the bearings.

Kurt

-----Original Message-----
From:	owner-ihc@domain.elided [mailto:owner-ihc@domain.elided] On Behalf Of Greg
Hermann
Sent:	Wednesday, April 07, 1999 8:44 PM
To:	ihc@domain.elided
Cc:	Tom Mandera
Subject:	Rear wheel bearings



It would seem that Tom's 44 rear axle is DIFFERENT than the type used in
the Scout 800's.

Never had seen this design in an IHC before.

References:
- Rear wheel bearings
  - From: bearbvd@domain.elided (Greg Hermann)

Prev by Date: Re: Rear wheel bearings
Next by Date: Re: 304 valve noise
Prev by thread: Re: Rear wheel bearings
Next by thread: Re: Rear wheel bearings
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index