IHC/IHC Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Post-Paragon report 3



Tom,
   Well, you start off by using Skycrapper u-bolts. Then you put the
point of a rock between the front lip of the spring plate and the front
outer u-bolt end, then you slide off that rock shearing the bolt end
right off at the plate. Darn cheap u-bolts! The easy fix is resessed
u-bolt plates with 5/8" u-bolts.
   We tried to use the HighLift to move the spring, no go! We were using
the HighLift as a spreader and couldn't get the spring to move. The
first solution was to hook up to it with my truck, but with just a
couple of 30' straps we decided we needed some chain. That was when one
of the guys suggested using his winch. Well, we couldn't turn that down!
   Rob runs a 3" body and 4" spring with 33-10.50's and hasn't rubbed
anything yet, and he was really twisted up this weekend. That is the way
to go, and it looks cool.

_____Dan Nees_____
cookiedan@domain.elided
Keep Scoutin' and I'll be Travelalling along!
3 Scout II's and still counting!
http://members.tripod.com/~IHCaholic/scoutindex.html


---- Begin included message ----
Geeze, Dan!

You really do need to come to RMIHR and play... gnarlier trails, and less 
damage!  I thought *I* was damage prone.. ;-)

How does one go about BREAKING a U-bolt again?...

For recentering a spring center-bolt and perch.. you don't need a winch.. 
just use your standard issue Hi-Lift Jack.. and maybe a length of chain.. 
works for me every time!

BTW, my 33s *do* rub.. with the sway bar disconnected... up front.  I've 
been running the last week w/ the sway bar off, and it lets the front 
articulate a bunch.. more than a few times I've twisted the Scout up and 
heard the front tires rubbing on the fender lip... MORE LIFT!!  I may 
have a set of 4" Skyjackers for sale by RMIHR...

-Tom

---- End included message ----

Home | Archive | Main Index | Thread Index