[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: //factory alignment specs
- Subject: Re: //factory alignment specs
- From: Henri Baccouche <henrib@xxxxxxxxx>
- Date: Mon, 16 Dec 2002 19:57:19 -0800
Submitted for critique........
On my 325 E30....
On a ~perfectly flat concrete driveway (which I built for this
purpose.....)
All tires at 36lbs cold
Without the ~175 lb weight on the front seat......
Using a $50 toe measuring spring loaded rod tool, I set the toe-in at
~1/16 inch
Recentered the steering wheel.
Car tracked straight without excessive wandering......
I was pleased, as the previous shop set toe-in was ~3/16 inch
Regards,
Henri
------------------------------