[alfa] 164 motor into milano

["Dean" <tessiedog@xxxxxxxxxxxxx>]

You should be able to bolt the 2.5 flywheel on to the 164 motor.
Use the 2.5 sarter (Im using the 2lt starter).
You may need to enlarge the rear holes in the sump pan due to the different
block lengths. Replace the rearmain seals and sump gasket. If you have all the
2.5 stuff you need to convert the 164 3.0lt it should not be to hard. Just
take your time!
Cheers,
Dean
Again dont bother with the 2,5 ecu or the motronic from the 164 you will just
waste time.
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided