Re: [alfa] Alternator repair/replacement options

["skippatnode" <skippatnode@xxxxxxx>]

Don,
    I used to rebuild alternators and starters and such, then I discovered
that rebuild shops can do a better job almost as cheap AND they are
gaurenteed!
    And, you are right.  You should be getting 13.5 to 14.5 volts with the
engine running.
Skip Patnode
67 Duetto
Norfolk, Va


Date: Sun, 2 Nov 2003 19:37:06 -0500
From: "Daegrigg (Don)" <daegrigg@domain.elided>
Subject: [alfa] Alternator repair/replacement options

Looks like the alternator on my 164L needs attention.  Per Fred's Di Matteo's
advise I checked the battery voltage before and after startup and it was 12;1
and 12.4 respectively - should be around 14 volts.  Also, voltage runs just
below 13 volts with car running and starter is noticeably slower.

That said, I am thinking about rebuilding the unit replacing the brushes and
diodes as necessary. Anyone with experience in this area?

Another option is a used unit for around $50.  Since we have a second 164, I
am thinking of installing a used unit and rebuilding the present one for a
back up.

Any suggestions on sources for parts and rebuild experience?

Thanks,
Don
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided