RE: Jim Le Lehman's

[Ferdinando Di Matteo <aroctech@domain.elided>]

He asks how much tension should there be on the chain etc.  The Alfa 
engine designers  put in a particular spring which is used to push the 
idler sprocket  out with just enough force.  Remember, that section 
MUSTR be clean and free to move.  To check the tension, press on the 
chain with your palm and it should not move more than a fraction.  To 
check if the idler assembly is free, loosen the adjuster bolt NOT MORE 
than one full turn, then with the cam cover off use s strong wooden rod 
to force the sprocket assembly in and out a couple of times, you'll see 
readily if it moves freely.  Regards, Fred Di Matteo  AROC USA 
Technical Advisor in Florida 
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided