RE: Help--74 Spica--adjuster screw under TA turned all the way

["Rotondi, Armando" <rotondiaj@domain.elided>]

-----Original Message-----
From: Rotondi, Armando 
Sent: Wednesday, October 16, 2002 8:42 AM
To: 'Daegrigg (Don)'
Subject: RE: Help--74 Spica--adjuster screw under TA turned all the way


Hi Don,

I'm referring to the gap between the lever and stop screw on the
outside of the pump.  I haven't measured the inside gap (the plunger
depth in the TA cavity), which you mention should be 27 to 29mm.
I've just assumed that the inside gap would be off as well. But this
is a good suggestion.  I'll look at that. Also, thanks for the tip about
the Oregon Chapter website, I'll look at it.

Armando
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided