Re: Milano clutch, 2nd gear syncro recap

[JJK1204@domain.elided]

bshorey@domain.elided writes:
<< nice write up.  one comment on the above - when pounding on that pin, you
 should support the shaft from the other side (it's not easy).  paul glynn
 has told me of bent shafts when removing stubborn pins without proper
 support.
 fwiw, 
 bs
  >>
I agree, nice write up. On the roll pin, I have been told that there is a
strap type of tool that wraps around the shaft and levers out the roll pin.

John Katos
87 Platinum

------------------------------