Re: Air conditioner condensor

[Angus Holliday <trstag@domain.elided>]

At 07:33 PM 3/25/99 EST, you wrote:
>In a message dated 3/24/99 11:31:34 PM Central Standard Time,
>gmerrel@domain.elided writes:
>
><< Hello Frank,
> 	Sounds right to me.  The compressor is a Borg/Warner York unit, made in the
> USA.  There is a Switch/Relay unit mounted on the driver side fender, dryer
>in
> front of it next to the radiator expansion bottle, condenser in front of the
> radiator.  I may have an engine compartment pic or two that I can send off in
>a
> day or two showing typical config.
>  >>
>
>
>Thanks, Glenn. It sounds like I'm missing the switch/relay.  I don't have the
>sub harness that goes to the relay or to the fan motors, but the wires end
>next to the compressor with male connectors on them.  A picture would be
>great.

The relay Glenn refers to is a "Rainco" switch.  If the pressure is
incorrect freon-wise it prevents the
AC from working.  It has a tube that runs to the top of the filter-dryer.
If an incorrect filter dryer has been
fitted it may have been removed.  The Rainco switch is a white box app
2X3x3. mounted on the LH inner fender (wing).

Walter
Stag Specialists
>
>Frank M
>
>
>