Re: [ihc] Valley Pan Vacuum port Was:Weird engine problem - calling the experts

[Dan Nees <cookiedan@xxxxxxxxxxx>]

Scott,
   As Ryan so correctly described, this is the PCV valve and grommet.
The valve can be found at Pep Boys. I got like 3 of them at Nats a
couple of years ago. They can be a bear to install however. Alot of
patience is involved.
On Sun, 2004-07-25 at 19:21, Scott Machalk wrote:
> Ok, sorry for the delay but I've finally gotteen around to making some 
> progress on the Engine problem.
> 
> I traded the propane for some starter fluid and was able to find a couple 
> small leaks right away. I fixed those, then I found a big one...
> 
> At the back of the valley pan (valve tappet cover) there is a (for lack of 
> the correct term)  vacuum port. This thing is sucking wind bad.
> 
> Three questions.
> 
> 1.  What is this thing called?
> 
> 2.  Where can I get one?
> 
> 3.  Can I put a new one in without taking the valley pan and intake 
> manifold off?
> 
> If my description is not clear, go to www.coolday.com/scout/leak.jpg and 
> see a photo.
> 
> Thanks again for everyone's help.
> 
> Scott