Re: [ihc] 74/75 Starters Update to clarify

["Ryan Moore" <baradium@xxxxxxxxxxx>]

----- Original Message ----- 
From: "Joel M Brodsky" <jmbrodsky@domain.elided>
To: "Ryan Moore" <baradium@domain.elided>
Cc: <ihc@domain.elided>; "Tom Mandera" <tsm1@domain.elided>
Sent: Wednesday, February 25, 2004 20:17
Subject: Re: [ihc] 74/75 Starters Update to clarify



>       Now, all that being said, why are we even discussing this?  I'm not
> sure.  It had a 392 with a 727 and a starter with a shim.  I put in a
> ...ummm.  -bigger than a 392, to a 727 with a starter with a shim, so it
> should be same-same, no?  Well, something is amiss and the shim doesn't
> look to be the likely culprit.  much.  I'm hoping at this point that the
> starter is mounted a bit too close to the ring gear on the flex plate and
I
> believe the ring gear to be NOS with brand new teeth.  Which should also
> explain some of the extra added gear mesh noise when the starter was
> running.
>
> JoelB
>

I looked and didn't see where you said what engine/tranny combo it was.  If
I msised it, sorry.

Possible the rebuilt starter has the wrong gear on the end?  Hopefully the
ring gear isn't hurt any.

-Ryan


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.594 / Virus Database: 377 - Release Date: 2/24/04