IHC/IHC Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ihc] in-tank fuel sock



----- Original Message ----- 
From: "John Harrison" <j-harrison4@domain.elided>
To: <ihc-digest@domain.elided>
Sent: Thursday, November 13, 2003 12:44
Subject: [ihc] in-tank fuel sock


> Thanks every one for their inputs.  It is a 5/16" pickup tube on the
sending
> unit.
> I think I'll probably take TRE's advice and add an inline filter just
after
> the tank.
>
> One more question, anybody have a part number for the gasket/o-ring that
> seals
> the sending unit to the tank, can one be made out of gasket material?
>
>
> thanks
>
> John Harrison
> SLL Engineering
> (903)868-5544
> j-harrison4@domain.elided
>

Those are also provided with sending units, and hence must be manufactured
somewhere... If you want to use a sealant, I'd say just make sure you use a
type of sealant that can handle gasoline... permatex/RTV might not be the
best choice here...

-Ryan


Home | Archive | Main Index | Thread Index