Re: Spindle nut stuff/Ryans questions answered/ response to Joel B

[Michael Alexander <malexand@xxxxxxxxxxx>]

>Sent: Tuesday, July 22, 2003 03:45
>Subject: Re: Spindle nut stuff/Ryans questions answered/ response to Joel B
>
>
>> The proper tool is refered to as a pin spanner wrench, I've always found
>the
>> awl in the toolbox and a hammer tighten it just fine.
>>
>> http://www.parktool.com/tools/SPA_6.shtml
>> didn't check to see if the pins were the right size on this particular
>> application

Note: I have one of these tools and it is a bicycle tool. The pins do not fit
the holes. It is way too flimsy to put the neccessary torque on the spindle
nut. 



m alexander