T-19 into a Scout 800 update

[John Fleck <jlfleck@domain.elided>]

Well the war is at a standoff. After taking the original clutch and
pressure plate off andf seeing original IH part numbers I though i was on
my way to a runner again. 

Well low and behold the T-19 has a longer input shaft than the Scouty 800
input shaft. So does a t-18 shaft fit a T-19 since they are almost
identical except for the syncro first gear. 

HELP: Paging Landry, Sutherland, or anyone who has a book of knowledge on
Transmissions that included the T-18 or T-19(exploded view of a T-18 and
T-19). Will the input shafts interchange?? Please look this up and e-mail
me asap. My poor 800 in trannieless and needs a transplant.

For thoes of you wondering why I want a T-19 its that I have one left over
from a Deal gone BAD that came out of a pickup truck and figured I would
try this first before searching for or rebuilding my current T-18. The
trannie grinds and pops out of second. Could this be from the worn out
clutch?? If it is then I have a backup plan if the 19 will not fit.

Thanks for the help all
Fleckster
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                        John L Fleck  
                     1225 N.E. McGee Way
                     Pullman, Wa. 99163
        Washington State University College # 509 332-7565 
        E-MAIL  jlfleck@domain.elided                
        ICQ # 8536313                 GOD bless you
        Personal Web Site: http://www.wsu.edu:8080/~jlfleck
            ("\-''-/").___..--''"'-._
               'o_ o  )   '-.  (     ).'-.__.')
   GO COUGS    (_Y_.)'  ._   )  '._ '. ''-..-'
              ..'--'_..-_/  /--'_.' ,'
            (!!),-'' (!!) ,'  ((!!-'
 WSU   Cougs Rule     WSU    Cougs Rule   WSU   Cougs Rule
***********************************************************