Re: Pitman Pulling Problems

To: ehegstrom@domain.elided (Eric Hegstrom)
Subject: Re: Pitman Pulling Problems
From: cookiedan@domain.elided (Daniel Nees)
Date: Wed, 3 Mar 1999 19:30:27 -0500 (EST)
Cc: ihc-digest@domain.elided (ihc mailing list)
Content-Disposition: Inline
Content-Transfer-Encoding: 7Bit
Content-Type: Text/Plain; Charset=US-ASCII
In-Reply-To: Eric Hegstrom <ehegstrom@domain.elided>'s message of Wed,03 Mar 1999 17:13:01 -0700
Reply-To: cookiedan@domain.elided (Daniel Nees)
Sender: owner-ihc@domain.elided

Eric,
   If you are trying to remove the Pitman arm from the steering box you
will have to do a variety of things. First soak it with PB B'Laster and
let it sit. Then put the puller on it for quite some time, tight. Take a
torch and heat the arm nice and hot. While the puller is on ther and it
is nice and hot, hit the arm with a BFH right on the arm, as close as
you can get to the steering shaft. A couple of shots will break it free.

_____Dan Nees_____
cookiedan@domain.elided
Keep Scoutin' and I'll be Travelalling along!
3 Scout II's and still counting!
http://members.tripod.com/~IHCaholic/scoutindex.html

Prev by Date: Re: gas tank
Next by Date: Re: I knew it! I knew it!
Prev by thread: Pitman Pulling Problems
Next by thread: Re: Pitman Pulling Problems
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index