Re: Oil dripping from bell housing

["Steven Stegmann" <s_stegmann@domain.elided>]

Kevin,

Don't waste money on the gaskets.  It will be leaking again in a month.  
Use "The Right Stuff" by Permatex.  Not cheap, but costs less than the 
gaskets and works much better.

Remember, there is no such thing as clean enough.  The surfaces have to 
be clean, seriously get all the old gasket off down to the steel.  Then 
clean with laquer thinner to get all the oil off the surfaces.  Then 
apply according to directions.  Mine haven't leaked in over a year.

Now to do the same to the oil pan gaskets.

Steve

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com