Re: Rag joint

["Jeff Tarquinio" <tark_terra@domain.elided>]

oh,
hmm, I could have sworn the times I have changed rag joints they were two different sizes.  The threaded end is the same but the stud ends are different.
Maybe there is more than one setup.  I did a chev joint most recently and it also had two different studs.
Oh well.
---
Layda,
Tark
'77 Terra 345/T19/D20
   Survivor of '98 Scout Nationals
'80 Scout II 345/TF727/single speed tc
   Clean machine



On Mon, 25 Jan 1999 09:17:01   Daniel Nees wrote:
>Tark,
>   No that is wrong. The original joint had two identical sized studs,
>both the size of the larger of the ones in the set. That is why I would
>rather have the correct set, as opposed to what you can buy. If the
>rubber would give out you would be left with more slop now than with the
>original, because of the smaller stud. Since the old ones were the same
>it doesn't matter which one goes where.
>   I have to go out now and take it apart and turn it over. I'm going to
>try and get some pictures while I'm there and write up a FAQ for it.
>
>---------Dan Nees---------
>cookiedan@domain.elided
>2 1979 Scout II's and one 1971 Scout 810
>http://members.tripod.com/~IHCaholic/scoutindex.html 
>
>


Angelfire for your free web-based e-mail. http://www.angelfire.com