Re: Closed/Open Knuckle...Full/Semi Floaters...

[cookiedan@domain.elided (Daniel Nees)]

Tom,
   It didn't get in the fill tube. I squirt silicon into the dipstick
cap and jam it on. Behind the torque converter on the pump there is a
hole at the top of the pump. This is a vent hole. The leval of the mu
was above this hole and poured into the tranny. I'm going to plug this
hole with a 3/8" bolt, I tapped the hole out for 3/8". Then, I'm going
to drill and tap the casing and put a vent into that so that I can put a
hose onto it and extend it.

Dan Nees
cookiedan@domain.elided
The
"Good" 1979 Scout II  345/auto 
The
"Bad" 1971 Scout II 304/T-18 
And the
"Ugly" 1979 Scout II 345/auto 

http://members.tripod.com/~IHCaholic/scoutindex.html