Re: Holley ProJection vs 4BBl carb

[Vinnie Moscaritolo <vinnie@domain.elided>]

On 1/7/99, Men from Black Helicopters forced "Darrel" to write :


> For your 304 I would recommend the 502-20 Digital System ($640 in
> Jegs) and the 534-54 O2 Sensor kit ($100). This system is for up to 275 HP

I didnt know that you needed both. OK fine..

>
> Holley also makes a much improved system (504-13) that you could also use 
> on a 392
> (the one above is too small for a 392), but it costs $1130 and you would 
> also need
> the $350 4 barrel intake. It includes a lot of other sensors and an idle air
> control motor, bottom line is that it's more sophisticated.


Ok I am confused are you saying that the 304 is too small for the 4Di kits 
they seem to start at 650 cfm or would that still work.. the 4Di seem to be 
a bit more interesting, again I am worried about using it with the 
roughness of a IH engine

Vinnie Moscaritolo
http://www.vmeng.com/vinnie/
Fingerprint: 3F903472C3AF622D5D918D9BD8B100090B3EF042
-------------------------------------------------------

Those who hammer their swords into plows,
will plow for those who don't."