IHC/IHC Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Acc Key Position Cure



Reply to the post on the acc key position (DanN?),
I replaced my column key switch with a flat instrument panel key 
switch years ago.  It was a simple task and made for easy ID of the 
wiring groups.  Recently, it has failed, but now that I have the wire 
groupd sorted out, one need only twist the appropriate bundles 
together.  Soldering the wire groupings helps ... prevents a rogue 
wire from striking the body.  You can make simple labels such as:
start 1-2, run 2-3, etc.... I find this method has not enticed theft 
... even with labels, the four wire bundles sticking out beneath the 
dash have not been messed with.  Mark    



Home | Archive | Main Index | Thread Index