Re: Stalling E28...

["Ron Jordan" <ron@xxxxxxxxxxxxxxxxx>]

.

Henri Wrote: The Idle control switch goes bad too........test with ohm meter

OK, I know where the idle control valve is,
I know where the throttle switch is,
so where is the idle control switch you refer to?
(like I mentioned.. no bentleys till my daily driver is mobile again)

Thanks
Ron Jordan

  ----- Original Message -----
  From: Ron Jordan
  To: henrib@domain.elided ; BMW ; E28 Group
  Sent: Thursday, June 27, 2002 4:08 PM
  Subject: Re: Stalling E28...


  The throttle seems to be butterfly adjusted.  I will take a look

  Thanks
  Ron Jordan

    ----- Original Message -----
    From: Henri Baccouche
    To: Ron Jordan
    Sent: Thursday, June 27, 2002 4:00 PM
    Subject: Re: Stalling E28...


    Look at the ICV........is this 10 years old ? It's probably stuck.....

    Is the throttle butterfly adjusted...... ? min 0005" clearance at the
    middle.....

    Give it a little more to see if you can make an idle......If yes, then
    replace

    ICV and  ( if necessary......) then the  brain.

    These are 10 year life expectancy items.......

    It's almost impossible to diagnose with replacement units.....to drop
    in.

    The Idle control switch goes bad too........test with ohm meter.
  --
  to be removed from bmw, see /bin/digest-subs.cgi
  or email "unsubscribe bmw" to majordomo@domain.elided

------------------------------