[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Problems taking fan off...E28



<<<<From: Mujahid 
> Subject: Problems taking fan off...E28
> 
> Hello and thank you all for your replies to my questions regarding
> "changing of
>  timing belt". I started on the project but gave up after I could not take
> the
> fan off. I got a hold of the nut holding the fan to the coolant pump but
> it wou
> ld not budge.>>>>>>
> 
First get some penetrating oil in there. Try locking the pulley by pressing
down on the fan belt. Then try wedging a wrench between two of the pulley
bolt heads. But don't get carried away. Striking the wrench with a hammer
will sometimes loosen up the rust.

------------------------------