[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (E30) Instrument Cluster Question
- Subject: RE: (E30) Instrument Cluster Question
- From: "Fadeev, Alex" <Alex.Fadeev@xxxxxxxxxxxxxx>
- Date: Sat, 19 Jun 1999 19:38:21 -0500
> the water temperature gauge has a tendency to wander towards
> the hotter end of the scale, and my fuel gauge will occasionally
> jump around between the actual fuel level and pegged all the way
> over. Usually, a thump to the dashboard or a tap on the gauge
> will fix the problem, but it has been getting worse. Obviously
> it is an electrical problem. Any ideas on how to fix it without
> having to replace the entire circuit board?
Derek,
Take the cluster out and tighten the nuts holding temp/fuel gauges
to the instrument cluster board. Those pesky nuts provide ground contact to
both gauges. With time the contact oxidizes and ground gets intermittent.
This is a very common problem.
good luck,
alex
------------------------------
End of bmw-digest V9 #1131
**************************