[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Camber Correction? on slightly lowered 325E



I recently installed E30 M3 springs on my 84 325E.  The slightly lowered ride
height and reduced roll in the corners is great.  However, the camber now
reads RF -2.2, LF-2.2, RR-2.3, and LR-2.7  Does anyone have suggestions for
correcting the front and rear camber?  What are the factory specs?  I would
rather not slot the front towers.

Thanks,

Carter

------------------------------