[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [M3/M5/M6] Clutch Part Number-Release Bearing



Mike.........the M3 Sachs clutch kits do not come with the proper release
bearings...there is a height difference between the Sachs 3151231031
bearing in the kit and the correct BMW part (mfg by INA).  The real M3
bearing casing is significantly thicker.....the bearing and race also looks
much beefier.  The light duty bearing you (probably) have will work but I
personally wouldn't use it in the M3 (or M5/M6...Sachs also has the bearing
in these kits as well).  SD  (PS- If your supplier has changed their ways
and is now sending the correct 21512226729 part, ignore this message)


=========================================
Steve D'Gerolamo - The Ultimate Garage
201-262-0412 / steved3@domain.elided / http://www.ultimategarage.com

------------------------------