[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: bmw-digest V9 #187

Hey everybody!!

I have a an'88 325...and I am trying to reset the service lights for an 
oil change.  On the homepage, it states .."run a jumper wire from pin 7 
to pin 19...turn ignition to position 2 and wait until the light goes 
out".  I tried that to no avail.  I noticed that there is no wire 
connected to position #19.  The instructions mention that #19 is 
ground...does that mean connect #7 to ground or what??

Help please!!

Thanks!

Mike
mkc_1975@domain.elided

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

------------------------------