[Prev][Next][Index][Thread]
<E30> RE: Road noise
Casey,
While I agree with the diagnosis by Erick (bad wheel bearings) I disagree with
the procedure.
You do NOT need a $500 tool to replace the bearings.
A simple puller (preferably 3 prong) is all the special tools
required, available for about $30 or can be rented from a tool
rental place for $7.
Let me know if you need detailed instructions.
Erik,
Who told you that E30 M3's require wheel bearings at 40K intervals???
My 89 M3 has 91K miles with a few autocrosses and driver's schools
and the bearings are tight and make no noise.
My 86 325es has 180K miles and I replaced the front bearings at 120K
but the rear are original with no signs of dying. This car is
autocrossed twice a month on R1's and has been to 9 drivers schools.
I consider the BMW sealed bearings to be very hardy and since they
are sealed, never have to be "repacked" every time you do the brakes.
Monty Sidhu
86 325es for sale
89 M3
At 04:12 PM 9/16/96 -0400, you wrote:
>
>From: NineForty4@domain.elided
>Date: Mon, 16 Sep 1996 14:33:10 -0400
?Subject: Road noise in E30
>Hi all,
> I have an '84 318i that had a bent rear rim and a terrible
rumbling
noise--I replaced the rim but the rumbling has not diminished. The
tire is
not cupped and has been balanced. What else could it be? Wheel
bearings?
> Anything typical on these?
>TIA,
>Casey Fox
>1984 318i 115,000miles
Your wheel bearing is junk. Whatever wrecked the wheel made the
balls leave
their marks on the races, and you hear them going over this uneven
terrain.
Go to a shop and get it fixed. You probably don't have the $500
bearing
puller tool.
BMW: Bent Mag Wheels :^(
Erik Ivarson
'89 M3 (these eat rear wheel bearings every 40k or so I'm told.)
'92 750iL