Re: [alfa] Kamm-tail spider tail light assembly

["Brian Butler" <brbutler@xxxxxxxxxxx>]

Thanks all for the help. It is clear to me now how the lenses come off. I
will wait till it warms up a little here in New England before trying again,
for fear of brittle plastic. Thanks again.

Regards,

Brian Butler
----- Original Message ----- 
From: <GModelle@domain.elided>
To: <alfa@domain.elided>
Sent: Monday, January 26, 2004 4:34 PM
Subject: [alfa] Kamm-tail spider tail light assembly


> Alfisti,
> Brian should be reminded that the knurled knobs that release the tail
light
> assembly are meant to be finger tight, and although they serve to provide
a
> grounding connection to the lights themselves are particularly fragile and
prone
> to stripping the stud right out of the plastic if you bear down too hard
on
> them. Another place to set the ground would be a better solution.
> modelle in somers point
> --
> to be removed from alfa, see /bin/digest-subs.cgi
> or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided