RE: [alfa] re: FI fuel lines

["Jeff Greenfield" <alfaguy@xxxxxxxxxx>]

Bruce -

To the best of my knowledge, the diameters of the fuel hose and fittings on
a spider fuel rail are the same as those on a Milano & 164, so yes they
should work.

HTH,

Jeff


-----Original Message-----
From: owner-alfa@domain.elided [mailto:owner-alfa@domain.elided] On Behalf Of
Giller,Bruce C.
Sent: Monday, September 08, 2003 8:27 AM
To: alfa-digest
Subject: [alfa] re: FI fuel lines

Jeff gives two part numbers for fuel lines and line clamps from your
friendly BMW dealer.  Are these the correct fuel lines to fit an '86
Spider fuel rail lines plus lines from the fuel pump to the fuel regulator?

	Bruce

	'86 Spider
	'73 GTV


> As has been discussed on the list many times in recent history, the proper
> fuel hose is in fact available from your local BMW dealer, part #: 13 31 1
> 469 781 will get you 1 meter. This should be enough for all the lines
under
> the hood.
>
> The hose clamps that I use are a VW part (just so happens that local BMW
> dealer is also VW, so they stock these under the VW part #). The part
number
> is: n-024-122-2. You cannot use a conventional worm type hose clamp here
as
> it will damage the hose and the more you tighten it, the more it will
damage
> the hose.
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided