Re: alfa-digest V9 #664

[AlfaNeely@xxxxxxx]

      Nothing fancy about the hold down stud, but you had better look in the 
5 mm bin of studs at the hardware store.  10 mm is the size of the wrench that 
fits a 5 mm nut.  

Ciao,
Russ Neely
Oklahoma City



In a message dated 7/24/2003 11:33:56 PM Central Daylight Time, 
owner-alfa-digest@domain.elided writes:

> 
> Date: Thu, 24 Jul 2003 22:21:56 -0600
> From: Ken Tubman <ktubman@domain.elided>
> Subject: distributor hold down stud
> 
> I have managed to strip the threads of the hold down stud for the 
> distributor on my '77 spider.  I can no longer tighten the distributor (not 
> to mention the nut that fell someplace where I can't find it).  It seems I 
> have to replace the stud.  Is there anything special about it?  Is it 
> something I can find in a hardware/auto parts store?  Just threaded 10mm on 
> both ends?
> 
> Thanks.
> ________________
> Ken Tubman
> ktubman@domain.elided 
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided