RE: alfa-digest V9 #664

["Jeff Greenfield" <alfaguy@xxxxxxxxxx>]

Ummm, errrrrr, no.

6mm is the size of the stud for the distributor which takes a 10mm wrench on
the nut. 6 x 1.0 is the size and pitch.

Jeff

-----Original Message-----
From: owner-alfa@domain.elided [mailto:owner-alfa@domain.elided] On Behalf Of
AlfaNeely@domain.elided
Sent: Friday, July 25, 2003 3:54 PM
To: ktubman@domain.elided; alfa-digest@domain.elided
Subject: Re: alfa-digest V9 #664

      Nothing fancy about the hold down stud, but you had better look in the

5 mm bin of studs at the hardware store.  10 mm is the size of the wrench
that
fits a 5 mm nut.

Ciao,
Russ Neely
Oklahoma City



In a message dated 7/24/2003 11:33:56 PM Central Daylight Time,
owner-alfa-digest@domain.elided writes:

>
> Date: Thu, 24 Jul 2003 22:21:56 -0600
> From: Ken Tubman <ktubman@domain.elided>
> Subject: distributor hold down stud
>
> I have managed to strip the threads of the hold down stud for the
> distributor on my '77 spider.  I can no longer tighten the distributor
(not
> to mention the nut that fell someplace where I can't find it).  It seems I

> have to replace the stud.  Is there anything special about it?  Is it
> something I can find in a hardware/auto parts store?  Just threaded 10mm
on
> both ends?
>
> Thanks.
> ________________
> Ken Tubman
> ktubman@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided