Fw: Temperature conversion help needed.

["Daegrigg (Don)" <daegrigg@domain.elided>]

----- Original Message -----
From: "Daegrigg (Don)" <daegrigg@domain.elided>
To: "Stuart Thomson" <stuart.thomson@domain.elided>
Cc: <alfa@domain.elided>
Sent: Thursday, January 23, 2003 7:30 AM
Subject: Re: Temperature conversion help needed.


> Stuart,
>
> Depending on your climate,  180 to 198F or 82 to 92 C is the range for the
> four cylinder Alfetta.  The OEM fan for the six cylinders comes on at 198F
> or 92 Celcius.  If this is for your GT Jr,?   The 82-92 is a fairly wide
> range from the factory and may indicate that the cut-in temp is not super
> critical.
>
> Don
> ----- Original Message -----
> From: "Stuart Thomson" <stuart.thomson@domain.elided>
> To: <alfa@domain.elided>
> Sent: Thursday, January 23, 2003 6:21 AM
> Subject: Temperature conversion help needed.
>
>
> > Hi All,
> >
> > I posted last night but no-one replied.
> >
> > I should have mentioned that I'm in Australia, and we have used the
> > Celcius scale for measuring temperature for long enough that I can't
> > remember what the conversion to deg F is.
> >
> > So, can someone tell me the best temp in F to set my newly installed
> > thermostatically controlled fan to come on at?
> >
> > At the moment I have it coming on slightly before the 180F mark, but it
> > doesn't seem to cycle the way it should, too low??
> >
> > Thanks in advance.
> > Stuart Thomson
> > --
> > to be removed from alfa, see /bin/digest-subs.cgi
> > or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided