RE: Block and tackle engine lift

To: "'Daegrigg $Don$'" <daegrigg@domain.elided>, <alfa@domain.elided>
Subject: RE: Block and tackle engine lift
From: "Brian Shorey" <bshorey@domain.elided>
Date: Wed, 30 Oct 2002 05:11:20 -0500
Content-transfer-encoding: 7bit
Content-type: text/plain; charset="us-ascii"
In-reply-to: <05f701c27f95$dcf825e0$1802a8c0@WorkGroup>
Organization: Cisco Systems, Inc
Reply-to: "Brian Shorey" <bshorey@domain.elided>
Sender: owner-alfa@domain.elided

> I am planning to pull the engine in my 86 spider.  Does 
> anyone have experience or a source for a block and tackle or 
> similar overhead set up to do this?

Use a chain fall, it will give you much better control.  Just make sure
you can roll the car out from underneath when you're done.

bs
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided

References:
- Block and tackle engine lift
  - From: "Daegrigg (Don)" <daegrigg@domain.elided>

Prev by Date: Re: buying a GTV6
Next by Date: re: how many GTV6's still in use?
Previous by thread: Re: Block and tackle engine lift
Next by thread: Re: Block and tackle engine lift
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index