RE 92 Spider Air hose

[Kelly McCrystle <patpend2000@domain.elided>]

If you have already checked the motor mounts and they
are in good condition, and you have replaced the pipe
with a new one here is another trick

Take some sandpaper, cut some strips about 1.5 inches
wide and double it over so the rough side is facing
out on both sides, slip this between the hose and the
air flow meter then tighten the clamp

Kelly M.
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided