Re: Alfetta bleed screws

["McCarty, Richard" <RMcCarty@domain.elided>]

Use a 7mm flare nut wrench if you can find one. A flare nut wrench firmly
grips the nut on 5 sides. Or maybe even better, use a 7mm 6 point socket, if
they exist. Be vewwy, vewwy careful. If the the bleeder screws are realy
stuck, you could easly break them off using a socket & ratchet.

Good luck,
Rich M
72 GTV, finally got the correct Speed Bleeders from Centerline - will try
them this week
66 Ducati Mach1 project
67 Gilera 124
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided