RE: Milano Ignition Switch

["John Katos" <john_katos@domain.elided>]

Ron,
Get out your trusty Dremel moto tool and using the cutoff disc cut a slot
for a flat blade screw driver. Remove screw.
Disassemble the lock mechanism via the key in ignition switch micro-switch
and remove the broken pieces.

John Katos
West Dundee, IL


-----Original Message-----
Hello everyone,
Another day, another project.
My key is stuck in the ignition switch of the Milano.
I got the cowling off of the column.
There is a pin that seems to be holding the switch in.
Any clue how to remove it.
The switch will not move to the position where I can remove it.
Earlier, I could not get the key in without forcing it.
Seems like time for a new switch if I can find one.
Any suggestions on how to just fix it?

Thanks
--Ron Sitnick
1987 Milano 2.5 Platino
1979 Fiat Spider 2000
-----------------------------
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided