RE: GTV6: Sport Suspension w/o Sport anti-roll bars?

["Jorge Mazlumian" <jmazl@domain.elided>]

<< SO, I 'm reluctant to do the welding of support brackets necessary
for the front Sport anti-roll bar.  Does anyone have any experience with
using just the Sport springs with the stock anti-roll bars?
Mark Kingsbury>>

Mark:
without the support triangular brackets welded to the chassis, you will rip
it off after enough hard turns.  The stock chassis there is not strong
enough for the higher forces the stiffer anti roll bar will apply.  Another
option is to turn less hard, but hten, you don't need the sport sway bars.
So if you want to be able to turn harder, you need a stiffer torsion bar,
but weld the plates on.
Jorge

------------------------------