Alfa Romeo/Alfa Romeo Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Tire & wheel options for '67 105



John,

We have Dunlops on my wife's stock '67 GTV in 185/65-15 size on the
4.5"x15" Fergat wheels; they work fine. I vintage race my '57 spider on
185/65-15 Continentals on the original steel Borranis without problems.
There are others I run with who use the AVSi on 4.5" rims with no problems.

Be careful of the 105 15" Fergat steel wheels if you autocross or race; I
have seen them break in the center section.

Cheers,
Sid Gage

>
>Date: Thu, 06 May 99 23:09:31 -0400
>From: "John Basel" <basel@domain.elided>
>Subject: Tire & wheel options for '67 105
>
>Its time for new (summer) tires for my '67 GT Junior.  The car
>still has a basically original suspension setup in good shape - so
>I don't really want to replace the studs (or spindles/axle) and go
>with alloy wheels.  So here are the steel wheel and tire options
>I'm considering:
>
>1. Stock 15x4.5" wheels with 165-15 tires.  Tire options are
>Michelin XZX, Dunlop SP20 (M&S), Firestone 560 (M&S).  Michelins
>are probably ok, but I really want something stickier.
>
>2. Stock 15x4.5" wheels with 185/65-15 tires.  There are lots of
>tires available.  The minimum recommended wheel width is 5", but
>I've heard that vintage racers use this size combination - but I
>don't know what specific tire they use.  I'd like to get the Yoko
>AVSIs.  The Tire Rack salesman said that the sidewall is so stiff
>that it may not be possible to mount AVSIs on the narrow wheels!
>I assume the handling would be ok, if they could be mounted?
>
>3. Ford 15" wheels from a Mustang(-92) or Thunderbird/Cougar
>(88-90).  These have the same bolt pattern (4x108mm) and offset
>(25mm), but I'm not sure if they are steel or alloy or how wide
>they are.  If they are steel and 5 to 6" they'd be fine.  AVSIs
>should mount without a problem and a wider wheel should support
>the tire better.
>
>4. Many other Ford/Audi 15" wheels.  These have the same bolt
>pattern, but a different offset (35mm).  Is the larger offset a
>problem?
>
>I'd like to know if anyone has tried any of the above (or similar)
>setups and what they found - especially mounting/handling for the
>AVSI/15x4.5 combination.
>
>TIA
>
>John Basel
>Bolton, MA
>
>67 GT Junior
>60 Spider Normale
>67 Duetto (semi-basket case)
>

------------------------------


Home | Archive | Main Index | Thread Index