Koni Struts / Ricambi Springs Numbers (164)

[bjanesi@domain.elided]

As a follow-up to my recent article in the Alfa Owner, here's the numbers
on the suspension overhaul with Koni struts and Ricambi springs.  These
numbers should be fairly consistent on any 164 (B/L/S/LS/Q), since both
the springs and struts were replaced (note - the Koni-supplied rear
spring spacer was NOT used)

Front right:	Ride height:  25 5//16";  13 7/16"	Camber:
- -2.5 
Front left:		Ride height:   25 1/4";  13
7/16"		Camber: -2.0

Rear right:	Ride height:  25 7/16";  14"		Camber:
- -1.5
Rear left:		Ride height:  25 1/4";  13
3/4"		Camber: -1.4

For ride height, the first number is the measurement from floor to wheel
lip (metal, not plastic splash shield), and the second number is wheel
lip to wheel center.   Camber is number of degrees negative camber. 
Measurements taken with battery in place, no driver or passenger.

Brad Anesi
'91 Project 164Q 5-speed

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]

------------------------------