RE: Head Light Covers Installation

["Brian Shorey" <bshorey@domain.elided>]

> Anyhow, when the headlights are behind the fenders, the rough hole
> in the fender is visible - that stainless steel ring is used to
> finish it.  The split is necessary so that you can reduce its
> diameter to fit it on.

jay is correct.  there is an alternative, however, which is to use the trim
rings from a duetto (or from a 1750 spider, for the purists).  these were
designed to be used with the covers, allow the headlights to be mounted from
the front, and look much nicer (imho).

bs

------------------------------