[none]

[Les Singh <Les.Singh@xxxxxxxxx>]

>Date: Sat, 31 Oct 1998 11:37:42 -0500
>From: "George Nunez" <ganunez@domain.elided>
>Subject: >
>  I recently got a new set of cams for my Giulia TI (its had a 1600 Duetto
>engine in since 1975) that, I was told, are the repacement p/n for the old
>105 48 0 320001.
>This new p/n from Alfa is 607-02056, when I opened the box there are 2
>exhaust cams, no p/n stamped, just a letter S (scarico) one of them. Well,
>thats ok because the cams are the same except for one thing.
>  Problem is the little vee notch used for setting the timing on the intake
>cam is now on the bottom.
>  Any advise would be helpful. I really just wanted to drop them in, now it
>looks like I`ll have to degree them. How about lobe centers ?
>  Also anybody tried 10548 cams on a 1600. Its had the stock 105 02 0
>320001for all these years but I wanted to try a bit hotter ones, 10.1 vs 9.5
>mm lift and 4 or 5 degrees more duration.
>TIA
>George N
>miami
>
>visit my cars and planes web site at:
>http://www.geocities.com/motorcity/track/4889/
>
>

------------------------------