diameter and width are fine, as is the offset. the problem you will have
(i believe) is that the hub/centering diameter will be wrong.
i believe these use the Fiat convention of 58.1 mm, while the Milano hub
uses the Alfa one of 58.6mm. sounds like a little but it is all that is
needed to prevent the wheel from mounting. you can grind the hole in the
wheel bigger i suppose - your call on if you can bare to do it.
i could be wrong, but you should do some checking.
andy
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided