Re: [alfa] EFI fuel pumps and pressures etc

To: "Greg Hermann" <bearbvd@xxxxxxxxxxxxxx>
Subject: Re: [alfa] EFI fuel pumps and pressures etc
From: "John Fielding" <johnf@xxxxxxxxxxxxxxx>
Date: Wed, 14 Apr 2004 09:26:03 +0200
Cc: <alfa-digest@xxxxxxxxxx>
Content-transfer-encoding: 7bit
Content-type: text/plain; charset="iso-8859-1"
References: <v01510103bca1f0508e48@[67.235.113.139]>
Reply-to: "John Fielding" <johnf@xxxxxxxxxxxxxxx>
Sender: owner-alfa@xxxxxxxxxx

Hi Greg,

1bar is 100kPa which is equal to 14.5 psig.
1 standard atm = 1013.25millibar = 101.325kPa which equals 14.69psig.
So as the difference is very small, about 1%, less than the width of the needle on a
typical gauge, the two values are for all intents and purposes interchangable.

John
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided

References:
- Re: [alfa] EFI fuel pumps and pressures etc
  - From: Greg Hermann

Prev by Date: Re: [alfa] Another might have been? (let the flames begin!)
Next by Date: [alfa] Alfa Romeo Visconti by Italdesign
Previous by thread: Re: [alfa] EFI fuel pumps and pressures etc
Next by thread: [alfa] Alfetta Transaxle Questions
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index